Simoniz S2000 Manual del operador descargar pdf (Pagina 12)

12- ENG

A04196

of the wand with the 2 mm hex

key provided (see Fig.11).

6. Clean the nozzle using the nozzle

cleaner provided or a straightened

paper clip. Insert into the nozzle

end and work back and forth until

obstruction is removed

(see Fig. 12).

7. Direct water supply into nozzle

end to backflush loosened

particles for 30 seconds

(see Fig. 13).

8. Reconnect spark plug wire

HOW TO CLEAN THE WATER

INLET FILTER

This screen filter should be checked

periodically and cleaned if necessary.

1. Remove filter

by grasping end

and removing it

from water inlet

of pump

(see Fig. 14).

2. Clean filter by

flushing it with water on both

sides.

3. Re-insert filter into water inlet of

pump. NOTE: Do not operate

pressure washer without filter

properly installed.

9. Reassemble the nozzle to the

wand. Tighten securely to prevent

leaks.

10. Reconnect wand to gun and turn

on water supply.

11. Start pressure washer and place

wand into high pressure setting to

test.

Filter screen

Fig. 11

Fig. 12

Fig. 13

Fig. 14

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios